 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FREQUENCY QEN05 SMD 5x3.2 XO - Communications Equipment Application Specification (Rev-C) Electrical Characteristics ......................................................P01 Mechanical Characteristics ...................................................P02 Ordering Information .............................................................P03 Suggested Reflow Soldering profile ......................................P03 Tape Drawing........................................................................P04 Reel Drawing ........................................................................P04 Frequency QEN05 SMD 5x3.2 XO - Communications Equipment Application Specification (rev-C) December 15th, 2005 Electrical Characteristics Electrical Parameters Frequency range (see note 1) Unit MHz Minimum 1.544 Typical Maximum 125 Test conditions Output logic Operating temperature range (see table 1) Storage temperature range Power supply voltage (Vcc) Frequency Stability (see note 2) HCMOS / TTL Output C C V ppm ppm mA pF % ns ms 15 40/60 7 10 30 Refer to Ordering Information Refer to Ordering Information From 10% Vcc to 90% Vcc From 10% Vcc to 90% Vcc -55 +1.8 25 50 -10 to +70 -40 to +85 +125 +5.0 100 5 Refer to Ordering Information Refer to Ordering Information Ref at 25C Refer to Ordering Information Aging (First Year) Input current (see table 2) Output load Duty cycle (see note 3) Rise & Fall time Start-up time Note 1: Not all voltages, loads or stabilities are available for frequency over 70 MHz. Note 2: Include 25C tolerance, operating temperature range, input voltage change, load change, first year aging, shock and vibration. Note 3: Duty cycle 45/55% is available on option. Table 1 : Stability Codes 25ppm 50ppm 100ppm -10 to +70C C B A - 40 to +85C G F D Table 2 : Input Current Frequency range (MHz) 1.544 to 9.999 10.00 to 34.999 35.00 to 49.999 50.00 to 125 Vcc=5V Cl=15 pF 15 mA 20 mA 35 mA 40 mA Vcc=3.3V Vcc=2.5V Vcc=1.8V Cl=15pF Cl=15pF Cl=15pF 8 mA 7 mA 6 mA 10 mA 8 mA 7 mA 25 mA 20 mA 15 mA 35 mA 30 mA 25 mA 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN05 SMD 5x3.2 XO - Communications Equipment Application Specification (rev-C) December 15th, 2005 * Mechanical Characteristics SUGGESTED PAD Hmax = 1.3 mm TOP VIEW BOTTOM VIEW #1 #2 #3 #4 Pin connections Tri state Ground Output +Vcc Tri state function Pin #1 Output (Pin #3) Open Active "1" Active "0" High Z Line 1 Line 2 Marking Manufacturing code + 05 + stability/supply voltage/output code Frequency in MHz (6 digits) Example for QEN05BDA / 50MHz Line 1 : G05BDA Line 2 : 50.000 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN05 SMD 5x3.2 XO - Communications Equipment Application Specification (rev-C) December 15th, 2005 Ordering Information QEN05 B Part numbering system D A R 50.000MHZ Package type Temperature Stability Supply Voltage A : + 5.0V D : +3.3V M : +2.5V N : +1.8V Output Output Symmetry Option Nominal Frequency (MHz) Please enter the nominal frequency SMD Package QEN05 : SMD 5x3.2 A : 100ppm vs -10 to +70C B: C: D: F: G: 50ppm vs -10 to +70C 25ppm vs -10 to +70C 100ppm vs -40 to +85C 50ppm vs -40 to +85C 25ppm vs -40 to +85C A : HCMOS 15pF B : HCMOS 30pF Blank : 40/60% R : 45/55% Suggested Reflow Soldering Profile 3 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN05 SMD 5x3.2 XO - Communications Equipment Application Specification (rev-C) December 15th, 2005 Tape Drawing Item Pitch of components Pitch of sprocket hole Length from hole center to component center Width of carrier tape Width of adhesive tape Height of component hole Diameter of sprocket hole Total of tape thickness Code P Po P1 W W0 A Do K Dimension 8.0 4.0 2.0 12.0 5.5 5.7 1.5 1.5 Tolerance 0.1 0.1 0.1 0.3 0.1 0.1 0.1 0.1 Reel Drawing Multiple : 1Kpcs per Reel Unit : mm 4 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. |
Price & Availability of QEN05CAA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |